產品介紹 Product introduction

防靜電硅膠防滑墊 Antistatic silicon film

防靜電硅膠防滑墊產品特點

1、經特種硅膠開發(fā)而成的止滑墊，具有吸附力（表面光滑），放置在防靜電托盤內可使手機模組、蓋板等緊貼在墊面上，既柔軟又有彈性，防滑的同時，消除靜電效果更佳。

2、本產品不使用粘接劑，不發(fā)粘，不留痕跡，且耐高、低溫度，可直接用水清洗，祛除止滑墊上的灰塵，可反復使用。

3、由于使用導電硅膠，在保持長久防止靜電產生的同時，不會有炭黑脫落，不出硅油。

4、本產品為網狀結構，故除具備止滑功能外，還有散熱的優(yōu)勢！

5、產品可調成各種顏色（以黑色和米黃色為常用），可以調整表面的防滑效果

Product features of anti-static silicone anti slip pad

1. The anti slip pad developed by special silica gel has adsorption force (smooth surface), which can make the mobile phone module and cover plate close to the pad surface, which is both soft and elastic. While anti-skid, it has a better effect of eliminating static electricity.

2. This product does not use adhesive, does not stick, does not leave traces, and is resistant to high and low temperature. It can be directly cleaned with water to remove the dust on the anti slip pad, and can be used repeatedly.

3. Due to the use of conductive silica gel, while maintaining long-term prevention of static electricity, there will be no carbon black falling off and no silicone oil.

4. This product is of mesh structure, so in addition to the anti sliding function, it also has the advantage of heat dissipation!

5. The product can be adjusted into various colors (black and beige are the most commonly used), and the anti-skid effect of the surface can be adjusted